Motion Sensor Wire Diagram 12volt
Adjustable PIR switch automatically activates connected 12VDC LED lights when human motion is detected. Adjustable sensitivity, detection range, and light-on time. Can be set to remain on for any period of time between 30 seconds and 9 minutes. Motion detection range is within 7 meters and 160 degrees from center of PIR sensor.
This entry was posted in LED lights, off the grid system and tagged 12 volt, 12 volt LED lights, 12 volt motion sensor, 12V LED lights, battery powered lights, LED lighting, off grid LED lights on January 16, 2011 by offgridcabin.
Disclaimer: * All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.
4. Fit terminal block onto pins and install the sensor, securing it onto the connection box with the plastic washer and metal nut provided. 5. Re-check if the wire connection is correct. 6. Cover base with sensor cover, then fix with 2 screws. Please Note: The 12V sensor can work from either 12 Volts DC or 12 Volts AC.
Wiring Motion Sensors without External Power. If your motion sensors need power, you can draw power from the Konnected device base as long as you are powering the device with the correct voltage. Most motion sensors and alarm system components operate on 12V DC
How to Wire a Motion Detector. Here is an existing fixture that can have a motion detector head added to it to provide automatic sensor control during the night time. Methods of Home Electrical Wiring Wiring Diagrams for Light Switches Wiring 3-Way, 4-Way and Dimmer Switches